Date: 10/5/2007
Name: Randy Blair
email: trijuanon@webtv.net

---

subject: Rudder

---

Hi Bob. I received your check today and will mail you the rudder, pintels and aluminum tiller bracket. The rudder and parts came off a "Kansas" San Juan that I am restoring. If you have trouble getting the rudder onto your boat, you might try removing the pintels from the rudder, then install just the pintels on the transom, then insert the rudder back into the pintels and drill new mounting holes. You can move the rudder up or down a little to get to new wood to drill into. You should then seal the old holes with resin so that water does not cause the fiberglass to separate from the cedar core. Talk to you later Bob.

Randy Blair
Wind and Wood Boats

---

Nice advertising Randy:-)

---

[Return to Harbor Messages | Create New/Followup Message]